Costway TQ10104 Mode D'emploi page 10

Right Arm
3
6
5
4. Pass the rotation axle through the hole at the end of the right
arm.
5. Fit a Ø10 washer to the end of the rotation axle.
6. Tighten a Ø8 lock nut to the end of the rotation alxe with a Ø8
socket wrench.
7. As shown, fit the roller to the roatation alxe on the right arm.
Attach the Roller
2
7 7
There are four stopers on
the Middle Axle.
1 1
Rotation Axle without
stoper.
4
1. Insert the middle alxe passes
through the hole in the middle of
the right arm, and make the
stopers of the middle alxe fit into
the groove on the right arm.
2. Fit a Ø10 washer to the end of
the middle axle from the outside
of the right arm.
3. Tighten a Ø8 lock nut to the
end of the middle alxe with a Ø8
socket wrench.
10