Kohler K-411 Guide D'installation page 4

Spout Supply Tube
Spout
Brass
Supply
Washer
Shoulder
Plate
Wood
Wood
Screw
Screw
Washer
Nut
2. Install the Spout Supply Tube
NOTE: Leave the protective sleeve on the spout supply tube until
the spout installation.
Slide the brass washer from the bottom of the spout supply tube
over the threads until it reaches the spout supply shoulder.
Insert the spout supply tube through the mounting hole from the
top of the deck/bath rim.
The flat portion of the brass washer should face forward. The
spout supply tube will be suspended by the brass washer.
Slide the plate (oriented with the tabs toward the deck) and
washer onto the spout supply tube from the bottom and thread
on the nut.
Tighten the nut.
Secure the plate to the rough deck with two wood screws.
3. Attach the Tubing
NOTE: The tee supplied with the supply tube may not be needed,
depending on the valve.
Measure, cut, and insert the copper tubing between the supply
tube and the valves as needed.
Dry fit the components to confirm proper fit.
Solder the copper tubes to the valve bodies, tee, and spout supply
tube.
1010568-2-B
All manuals and user guides at all-guides.com
Spout
Supply
Tube
Threaded
Collar
4
Tee
Kohler Co.