Publicité
Les langues disponibles
Les langues disponibles
Daily Checklist and Storing for your NEUTON Mower
To help maintain your NEUTON Mower for optimum performance, we recommend you follow this checklist each time you
use your machine. Also, follow the checklist for storing the machine.
Do not insert the Battery until you have completed all of the daily checks and you have moved the Mower to the area that
you are going to mow.
[ ] BATTERY: Make sure the Battery has a full charge.
[ ] INSPECT: Before inserting the Battery, check under the Mower Deck and make sure that the Blade is attached securely.
Inspect for any visible damage to the Blade or Deck. Inspect the Mower Blade and Deck and clean them to remove
any debris (such as grass or twigs) that might be clinging to the Blade or underside of the Deck from the last use. For
the best performance and longest life, it is best to clean the Blade and underside of the Deck of any clinging debris
after each use. Always follow the safety precautions when cleaning the Blade.
Make sure all Knobs, Bolts, Attachments, Guards, and Covers are in place and securely attached.
Make sure the Motor shuts off when you release the Control Lever(s).
[ ] NOISES: If you notice anything unusual, such as a vibration or odd sound, shut the Mower down immediately. Remove
the Battery. Following all safety procedures, inspect the Mower Blade and underside of the Mower for any obstructions.
If you cannot find the cause of the problem or are uncertain what to do, then have the Mower inspected by a qualified
repair shop before using it, or visit our website at www.neutonpower.com.
[ ] MOWING: If you are uncertain whether the grass you want to cut is too long or thick for optimal cutting, raise the
Height and mow the yard in multiple passes, cutting it slightly shorter each time. It is best to mow more frequently,
rather than let the grass become excessively long.
Push the Mower (before starting it) to the lawn area that you wish to mow.
NOTE: The length of time that a Battery can hold a charge while mowing depends upon lawn conditions; tall or thick grass
makes the Mower work harder causing the Battery to discharge faster.
Cleaning and Storing
[ ] Use a soft nylon brush or non-metallic scrubbing pad to remove any clippings that have accumulated on the
underside of the machine. Do not use a wire brush; it will scratch and harm the surface of your machine.
[ ] Using a damp cloth or sponge with a mild soap or detergent, clean the machine. Never use water, gasoline, solvents,
or other petroleum-based or solvent-based products when cleaning – remember that this is an electric machine.
[ ] Always store the machine indoors in a dry place and out of the reach of children.
[ ] Always store the Mower with a full Battery charge in a dry environment where the temperature is between 40ºF (5ºC)
and +95ºF (+35ºC). Make sure the storage temperature will never be outside these limits. For long-term storage, store
the Battery in an environment where the temperature is lower, since the Battery self-discharges slower at lower
temperatures. During long-term storage of Batteries that are intended for reuse, periodically recharge the Battery, as
recommended in "Chapter 4: Charging and Caring for the Battery". See the TIPS on page 14.
[ ] Do not store the Mower chemicals, such as fertilizers, organic or other solvents. These products are often highly
corrosive and may cause permanent damage to your Mower.
Copyrights and Trademarks
©2010 Neuton Power Equipment, a division of Country Home Products.
NEUTON and NEUTON logo are trademarks of Country Home Products.
All rights reserved.
Documentation
Produced in Taiwan R.O.C. exclusively for Neuton Power Equipment and meets CPSC Blade Safety requirements.
Neuton P
E
OWER
QUIPMENT
7 5 M E I G S R O A D , V E R G E N N E S , V E R M O N T 0 5 4 9 1
www.neutonpower.com
All manuals and user guides at all-guides.com
©2010 Neuton Power Equipment 267991
Publicité
