Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
4.
A. Disassemble the leveller.
B. Unscrew the bottom right hinge.
C. Install the leveller to the other side.
D. Fix the bottom hinge on this opposite side.
5. Reinstall the door on the hinge properly,
take care about the vertical alignment.
6. Fix firmly the top hinge on the other side
and put on hinge cover.
GB-18
7. Replace the leveler to the other side and
adjust it to make sure the cabinet level.
MAINTENANCE
FREEZER DEFROSTING
Frost will accumulate inside the freezer
depending upon the length of time during which
the door is left open or the amount of moisture
introduced.
It is essential to ensure that no frost or ice is
allowed to form at places where it will affect the
close fitting of the door seal.
This might allow air to penetrate the cabinet,
thus encouraging continuous running of the
compressor.
Thin frost formation is quite soft and can be
removed with a brush or plastic scraper. Do not
use metal or sharp scrapers, mechanical devices
ENGLISH
GB-19
Publicité
