Black & Decker PRO Serie Mode D'emploi page 7

Switching on and off
• To switch the tool on, press the variable speed switch
(1). The tool speed depends on how far you press the
switch. As a general rule, use low speeds for large
diameter drill bits and high speeds for smaller diameter
drill bits.
• For continuous operation, press the lock-on button (2)
and release the variable speed switch. This option is
available only at full speed. This option does not work in
reverse rotation.
• To switch the tool off, release the variable speed switch.
To switch the tool off when in continuous operation,
press the variable speed switch once more and release
it.
Maintenance
Your tool has been designed operate over a long period of
time with minimum of maintenance. Continuous satisfactory
operation depends proper tool care and regular cleaning.
Warning! Before performing any maintenance, switch off
and unplug the tool.
• Regularly clean the ventilation slots in your tool using a
soft brush or dry cloth.
• Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
Accessories
The performance of your tool depends on the accessory
used. Black & Decker accessories are engineered to high
quality standards and designed to enhance the performance
of your tool. By using these accessories you will get the very
best from your tool.
All manuals and user guides at all-guides.com
Specifications
Voltage
Power input
No-load speed /min
Max drilling capacity
Steel/concrete
Wood
Weight
ENGLISH
V
ac
B5,B9
W
mm
mm
kg
BPDH7013
220-240 V ~ 50/60 Hz
700
0-2800
13
20
1,9
7