Black & Decker DCM600 Mode D'emploi page 6

ENGLISH
Note! Do not fill with less than 2 cups of water
or above the MAX mark on the water tank
gauge.
• Close the water tank lid (4) and place the
empty carafe (8), with the lid closed,
Warning! DO NOT open the water tank lid (4)
whilst the coffee maker is on. Hot water may be
ejected.
Switching on and off
• To switch the appliance on, press the on/off
button (11).
• To switch the appliance off, press the on/off
button (11) again.
Note! Once the brewing process is complete the
coffee maker will begin the Keep Warm Time.
Pressing the 'ON/OFF' button (11), when the
coffee maker is already on, will cancel the
brewing process / keep warm time and will turn
the coffee maker off.
Anti-drip function
The appliance is fitted with an anti-drip function,
allowing you to remove the carafe at any time,
even when coffee is still dripping from the filter
bowl.
• Take the carafe (8) from the hotplate (12)
and pour the desired amount of coffee.
• Replace the carafe (8) on the hotplate (12)
and allow the remainder of the coffee to drip
into the carafe (8).
Note! The carafe should be returned to the
hotplate within 30 seconds of removal.
6
All manuals and user guides at all-guides.com
Cleaning and maintenance
Warning! Before cleaning and maintenance,
switch the appliance off and remove the plug
from the socket.
• Using the handles, remove the filter (1) from
• Wash the carafe (8) and the filter (1) in hot,
• Wipe the outside of the appliance with a
Descaling the appliance
If the appliance is used in an area with hard
water, it is advised to de-scale the appliance
when from time to time.
• Use a commercial de-scaling agent for coffee
Technical data
the filter holderl (2). Remove the used coffee
grounds from the filter.
soapy water. Dry all parts and refit them.
damp cloth.
makers, or use water and vinegar as follows:
Voltage
Power
Weight
DCM600
220 – 240 Volts
(50/60 Hz)
800W
2 kg