Aerus LAUNDRY PRO 2.0 Mode D'emploi page 9

Masquer les pouces Voir aussi pour LAUNDRY PRO 2.0:

Les langues disponibles

SYSTEM SET UP

• Electrical Shock Hazard; when working with electrical connections, the appliance and surrounding area should be clean

• Electrical Shock Hazard; DO NOT use an extension cord. Failure to follow these instructions can result in death, fire,

WARNING

1. Plug power cord into the wall outlet of your home's electrical power system.

See page 4 for electrical requirements.

2. Turn on the cold water valve.

3. Check all hoses to ensure no water is leaking. Tighten if necessary.

4. Start your washer. The status light should illuminate blue after a few seconds.

NOTE:

Your Laundry Pro 2.0 will automatically turn on and off as your washing machine starts,

and stops.

and dry of any standing water; failure to follow these instructions can result in death, fire, or electrical shock

or electrical shock

Status Indicator Lights