Aerus LAUNDRY PRO 2.0 Mode D'emploi page 5

Masquer les pouces Voir aussi pour LAUNDRY PRO 2.0:

Les langues disponibles

BEFORE YOU START

Your Laundry Pro 2.0 unit was factory tested. It is normal for some residual water to still remain in the unit as a result of

these tests.

CAUTION

•

Remove your new Laundry Pro 2.0 from its packaging

•

Inspect the unit for any signs of shipping damage

REMOVING COVER

1. Remove the two (2) cover screws located on the bottom of the unit.

2. Remove the two (2) screws (not shown) along the top of the Laundry Pro 2.0.

3. To remove the cover, pull the top away from the unit, then lift off the cover.

Screws