Philips PSD1211 Mode D'emploi page 16

ENGLISH
16
1
2
All manuals and user guides at all-guides.com
6 Pull the sling through the other ring (1).
Then wrap the sling around your arm or
leg once more and fasten it with the Velcro
fastener (2).
Note: The two small grey Velcro pads on top of the
other end of the sling enable the tightest adjustment.
Treatment procedure
1 Press the on/off button to switch on the Philips
BlueControl.
Caution: Never look directly into the light source
during use.
Do not intentionally touch the sensor in the centre
of the Philips BlueControl when it is switched on.
Do not cover the Philips BlueControl with other
textile materials than the fixation strap when it is
switched on.
2 The Philips BlueControl flashes blue to indicate
that it is ready for treatment. The treatment
starts soon after the sensor detects the skin to
be treated.
, The LED indicator lights up solid blue and
a sequence of two tones indicates the treatment
is in progress.
3 The Philips BlueControl automatically switches
off after the treatment time
(approximately 30 minutes) has elapsed.