D-Link DSL-524T Guide D'installation Rapide page 10

Configuring the Router (continued)
Dynamic IP Address Connections
For this connection type, the user may choose Bridged IP LLC or Bridged IP VC-Mux. Both
of these connections require the user to have additional software located on their computer to
negotiate the connection with the ISP. Both Bridged modes will automatically set the network
connections. If you selected the Dynamic IP Address connection type, select the Connection
Type used for encapsulation and if you have been instructed to change the VPI number and
VCI number, type in the new values. Click Next when you are ready to continue the Setup
Completed menu.
Enter the
VPI and VCI
numbers that
have been
provided by
your ISP.
The Cloned MAC Address field is
used to copy the MAC Address of
your Ethernet Adapter to the router.
Enter the MAC Address
space provided and click the
Mac Address button.
All manuals and user guides at all-guides.com
into the
Clone
10
Click the Next button to skip ahead
to the Setup Completed menu.
Select the
Encapsulation
as 1483
Bridged IP
LLC or 1483
Bridged IP
VcMux as
instructed by
your ISP.