Elica Atlantis Guide D'utilisation, D'entretien Et D'installation page 8

15. If supplied dismounted for shipping, assemble the lower
part of the hood with the internal blower housing:
a.Remove the grease filter (See also Care & Use section
- Charcoal filter).
b.Rest the internal blower housing on a flat surface and
thread completely the lower part of the hood onto it.
c. Connect all cables:
All manuals and user guides at all-guides.com
8
d. Fasten the hood to the motor unit using 8 screws:
6 screws from the top
2 screws from the bottom
16. Hang hood with the 2 mounting hooks.
WARNING
Excessive Weight Hazard - Use two or more people to
move and install range hood. Failure to do so can result
in back or other injury.
17. Level the appliance, using a carpenters level across
bottom of hood with leveling screws in mounting hooks.
18. Secure hood with 1 screw on bottom.