Sublue WhiteShark Tini Manuel De L'utilisateur page 9

3
Cover up the handle bracket
decorative cover
The decorative cover is connected by the buckles and the handle bracket. If you
need to remove the cover, the elasticity of the plastic itself can be used to remove it
with a little force.
2
Assembly of Handle and Handle Bracket
Pass the control handle and the grip handle
through the handle bracket mounting holes
and tighten them.
The control handle can be installed on the
left or right side according to the needs.
Before each use, check whether the
tightening handle is tight.
9
4
Complete the assembly of
power system and handle bracket
Directions for Operation
1 Operation Description
Switch/speed-level
adjustment button
Switch/ networking toggle button
Operation Method
Items
Press the power system
To start
switch/networking toggle
the power
button for 3S. The power
system
1 system light will be on and
the start is successful
Press and hold the control
To start handle switch/speed-level
adjustment button for 3S.
the control
The handle light will be on
handle
and the start is successful
Networking button
Start button
Photos Remarks
The start speed is "low
speed" by default.
The initial start speed is
"low speed" by default.
10