Sublue WhiteShark Tini Manuel De L'utilisateur page 8

Socket
When charging, please note that the positive
and negative signs of the charging plug
should be in the same direction as those of
the battery to avoid mis-insertion.
Charging of Control Handle
The control handle is embedded with a magnetic charging connector, which can be
charged with the magnetic charging cable of Sublue.
To charge the controller, an adapter with output voltage of 4.5-5.5 V and current of 1-3 A with
the charging cable of Sublue is required. The charging time is approximately 1.5 hours.
Please clean the water or dirt at the contact before charging.
7
Adapter Battery and Charging Base
3 Read the User Manual
Before using, please carefully read the user manual and be familiar with the product
operation and instructions.
4 Start Use
Explore the underwater world with your WhiteShark Tini.
Before using the product, please be familiar with the product performance in an
absolutely safe water environment and fullymaster the operations.
Instructions for Assembly
1 Assembly of Power System and Handle Bracket
1
Install the handle bracket onto the installation
slide way of the power system
2
Tighten the quick-release screws of
the handle bracket
8