Kyocera FS-C1020MFP Guide page 20

Using the Fax Function
Fax destination settings
Item
Quick Dial / Speed Dial
Name
2
Fax Number
Basic Operation for Sending a Fax
This section describes the basic oper-
ation for sending a fax.
A
Press the {Facsimile} key.
B
Place the original on the exposure
glass or in the ADF.
If necessary, configure the ad-
vanced scan settings.
C
Enter the fax number (up to 40
characters) using the number
keys.
D
Press the {B&W Start} key.
When using the exposure glass in
Memory Transmission mode, you
will be prompted to place another
original. In this case, proceed to the
next step.
Receiving a Fax
This section describes the reception
modes and the basic operations for
receiving a fax.
Selecting Reception Mode
This section describes how to select
the reception mode.
The reception modes are as follows:
A-16
All manuals and user guides at all-guides.com
Setting
Required
Optional
Required
Description
Select the number to which you want to
register Quick Dial or Speed Dial desti-
nation.
Name of the destination. The name spec-
ified here will be shown on the screen
when selecting a fax destination. Can
contain up to 20 characters.
Fax number of the destination. Can con-
tain up to 40 characters.
E
If you have more originals to
scan, press {1} within 60 seconds,
place the next original on the ex-
posure glass, and then press the
{OK} key. Repeat this step until
all originals are scanned.
If you do not press {1} within 60
seconds, the machine will start to
dial the destination.
F
When all originals have been
scanned, press {2} to start send-
ing the fax.
Reference
For complete information about
t h e f a x f u n c t i o n , s e e U s e r
Guide .
• Manual mode (manual reception)
• Fax Only mode (auto reception)
• FAX/TEL mode (auto reception)
• FAX/TAD mode (auto reception)
A
Press the {User Tools} key.