Publicité
Les langues disponibles
Les langues disponibles
Installation
7) Attach supply lines to shut-off
valves and hand tighten. Using a
wrench, finish with one-half turn.
DO NOT overtighten.
1
1
Maintenance
1) Turn off water supply. Remove
plug button (A). Loosen and
remove the handle set screw (B),
handle (C), collar (D) and nut (E).
4
C
6
3
D
7
E
A
Finish is spotting.
Symmons Industries, Inc.
Copyright © 2018 Symmons Industries, Inc.
All manuals and user guides at all-guides.com
8) Remove aerator (I) and flush lines
free of debris. Check for leaks.
2
2) Remove old cartridge. Correctly
align new cartridge (G) and insert
into faucet body (H). Install nut (E)
and secure collar (D).
1
B
5
Troubleshooting Chart
Elements in water supply may cause
water staining on finish.
■
■
31 Brooks Drive
Braintree, MA 02184
■
symmons.com
9) Adjust limit stop washer to limit
handle turn to the hot position if
desirable.
I
Note: Counterclockwise to lower
temperature, clockwise to increase
temperature.
3) Replace handle (C) and reinstall
set screw (B). Tighten set screw.
Reinstall plug button (A).
D
4
E
3
G
2
H
5
Clean finished trim area with a soft
cloth using mild soap and water or a
non-abrasive cleaner and then quickly
■
Phone: (800) 796-6667
■
gethelp@symmons.com
C
1
2
B
rinse with water.
■
Fax: (800) 961-9621
■
■
ZV-3118 REV E
110218
A
Publicité
