Symmons SCOT/Metering SLS-7000 Serie Manuel D'utilisation Et D'entretien

SLS-7000 Series
Metering Lavatory Faucet
Operation & Maintenance Manual
Model Numbers

SLS-7000
SCOT Metering Lavatory Faucet
Modifications
 -BH Braided hose
 -C
Cold marking on cap in place of standard cap
 -DP 8" deck plate
 -DP4 4" deck plate
 -G Grid drain
 -H
Hot marking on cap in place of standard cap
 -ML Maxline thermostatic mixing valve for
temperature selection
 -MV Mechanical mixing valve for temperature
selection
 -OFG Offset grid strainer
-QC
 Quick close cartridge
 -STE
8" supply tube extensions with
compression couplings
Note: Append appropriate -suffix to model number.
Dimensions
A A
B B
C C
E E
Note: Dimensions subject to change without notice.
SCOT
H H
D D
/Metering
®
Specification
Metering lavatory faucet features single hole mount and
1/2" IPS male supply connection for cold or tempered water.
Vandal resistant 0.5 gpm (1.9 L/min) aerator limits water
flow to a maximum of 0.25 gpc (0.95 L/cyl) @ 60 psi with a
maximum 30 second closing time. Faucet constructed from
brass, plated in standard polished chrome finish.
Compliance
-ASME A112.18.1/CSA B125.1
-NSF/ANSI 61.9, NSF/ANSI 372
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
F F
G G
I I
Measurements
A Ø 1-5/8", 41 mm
B 4-15/16", 125 mm
Deck Thickness Ref.
C Min. 5/8", 16 mm
Max. 1-1/8", 29 mm
D 2", 51 mm
Hole Size
E
Min. Ø 7/8", 22 mm
F 5-3/8", 137 mm
G 4-3/8", 111 mm
H 2-1/16", 52 mm
I Ø 2", 51 mm