SK6710PD
Single Handle Pull-Down Kitchen Faucet
Specification Submittal
Model Numbers
☐
SK6710PD
Single Handle Pull-Down Kitchen
Faucet
Finish Options/Modifications
☐
STS
Stainless Steel finish
Note: Append appropriate suffix to model number.
Compliance
ASME A112.18.1/CSA B125.1
NSF/ANSI/CAN 61: Q<1, NSF/ANSI 372
Architectural/ Engineering Specification
Symmons Identity Single Handle Pull-Down Kitchen Faucet ____________ with Single hole mount configu-
ration, 3 hole mount configuration with optional 8" deck plate, Two mode wand (spray to stream touch control
& standard), 360 degree spout rotation, Single handle cartridge with ceramic control components, 25 inch
braided hose water supply connections, Standard 1.5 gpm (5.7 L/min) flow rate, components shall be met-
al and nonmetallic construction, plated in standard polished chrome finish, 10 Year Commercial Warranty.
ASME A112.18.1/CSA B125.1, NSF/ANSI/CAN 61: Q<1, NSF/ANSI 372 complaint. Available options: "STS - Stain-
less Steel finish".
Location:
Identity
TM
Feature Highlights
•
Single hole mount configuration
•
3 hole mount configuration with optional 8" deck
plate
•
Two mode wand (spray to stream touch control &
standard)
•
360 degree spout rotation
•
Single handle cartridge with ceramic control
components
•
25 inch braided hose water supply connections
•
Standard 1.5 gpm (5.7 L/min) flow rate
•
Components shall be metal and nonmetallic
construction
•
Plated in standard polished chrome finish
Warranty
Limited Lifetime - to the original end
purchaser in consumer/residential
installations.
10 Years - for commercial/industrial
installations. Refer to
www.symmons.com/warranty for
complete warranty information.