Publicité
Les langues disponibles
Les langues disponibles
INsTaLLaTION INsTruCTIONs
1
Note the sequence of filters!
2
3
18
Determine the installation posi-
tion in the horizontal course of
the drinking water pipe in the di-
rection of pressure. Make the pipe
opening of the appropriate size
(observe the dimensions of the fil-
ter system). Observe the wall dis-
tance to the centre of the pipe.
sequence of filters in flow di-
rection: 1. basic filter, 2. intensive
filter, 3. limescale protection, 4. PI
filter
Unscrew all lower parts of the
filter housings from the housing
heads using the housing key.
Connect the housing heads with
the help of the double nipples
(recommended to use hemp) and
tighten them firmly.
5
6
Screw the wall brackets onto the
filter housing heads with the 4
stainless steel screws.
Install ball valves in front of and
behind the system. The valve
behind the system is mandatory
when changing the filter later!
Attach the pre-assembled system
to the wall and connect it to the
cold-water pipework.
Reconnect the lower housing parts
to the housing heads and tighten
them with the housing key.
en
19
Publicité
