Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS
*Please keep this owner's manual for future reference.
*If you have opened the carton and removed all packages, please disregard
the STEP 1. See the STEP 2 directly
STEP 3
1
2
4
5
STEP 1
Unpack and identify all parts using the parts list provided.
STEP 2
1) Check each part before using the product. Make sure the gas supply
system is turned "OFF" before assembling. See Figure 1
2) Locate the battery, remove the plastic cover first. Unscrew the rubber cap
of Electric Ignitor, place an AAA battery into the battery case. Make sure the
positive pole ("+") is towards the cap. Screw the cap back to the battery
case tightly. See Figure 2
3) Place the lava rocks evenly in the fire bowl on the top of the fire bowl.
See Figure 3
4) Open the storing door on the fire bowl for the gas tank.
5) Put the gas tank in the metal stand. Make sure the gas tank sits on the
metal stand completely. Turn the wing screw on the outer part of metal stand
clockwise to secure the gas tank tightly. See Figure 4.5
6) Use the connector to assemble the glass cover, pay attention to the
screw to protect, not loose phenomenon.
18
3
6
WARNING
DO NOT COVER THE IGNITION
SCREEN when placing the lava rocks
into the fire bowl. Always keep Ignition
Screen visible.
This screen must be clear and free of
obstructions at all times to insure proper
operation.
The burner of the fire bowl
must be covered by lava
rocks completely.
Otherwise the flame may be
extinguished occasionally.
See the Figure CORRECT
and INCORRECT for
reference.
CORRECT
LP (Liquid Propane) gas supply connection
CYLINDER VALVE
BLACK COUPLING NUT
turn clockwise to connect
REGULATOR
Screen
Do not place
lava rocks
on screen.
Keep screen
clear
INCORRECT
PRESSURE
RELIEF VALVE
BLEED-OFF
VALVE
turn clockwise
to reseal
19
Publicité
