Uline H-10216 Mode D'emploi page 2

NOTE: Count and inspect all pieces before
disposing of any carton or packing materials.
NOTE: Assemble on a smooth, non-marring
surface to avoid scratching.
1. With a second person, attach hexagonal drive
rod (5) to the top bracket between left and right legs.
(See Figure 1)
Figure 1
2. Install support bar (4) between left and right legs
using four M8 x 25 mm bolts (A). Tighten using #6
Allen wrench. (See Figure 2)
NOTE: Ensure opening in middle of support bar
is facing up.
Figure 2
A
PAGE 2 OF 15
ASSEMBLY
5
5
4
4
4
3. Install hole covers (G) into side of each leg.
(See Figure 3)
Figure 3
4. Insert top support block (H) into opening in support
bar (4). Rotate to lock in place. (See Figure 4)
Figure 4
H
G
0623 IH-10216