Anker PowerConf H700 Mode D'emploi page 8

Pairing with USB Bluetooth Receiver
Plug the USB Bluetooth receiver (with the USB adapter, if necessary) into your PC's USB
port. PowerConf H700 will automatically connect to your PC when powered on.
• The LED indicator on the USB Bluetooth receiver will flash blue during pairing,
and will be steady blue when connected.
• Make sure to select "Anker Soundsync" as the audio input and output device for
your conferencing software and computer.
PAIRING
CONNECTED
Dual Pairing
To pair with another device when already connected with one device, press the power
button twice until the LED indicator on the headset flashes blue.
Anker PowerConf H700
Anker PowerConf H700
Anker PowerConf H700
PAIRING
CONNECTED
PAIRING
CONNECTED
L
Anker PowerConf H700
L
Anker PowerConf H700
R
R
EN 06