Hamilton Beach 04492F Mode D'emploi page 6

All manuals and user guides at all-guides.com
840144200 ENv02.qxd 3/8/06
Setting the Controls
1. Air Quality Sensor Display (on
selected models only) – When the
air purifier is first turned on, the Air
Quality Sensor will analyze the air to
determine the current air quality. It
may take up to one minute to acti-
vate the sensor. The sensor will then
continue to monitor and show the air
quality (poor, fair, or good) in a bar
graph in the display.
If the fan is set to Auto, the sensor
automatically adjusts the fan speed
for the most effective air purification.
2. Power On Indicator – Lights when
unit is on.
6
11:51 AM Page 6
3. Fan Speed Knob – Turn the fan
speed knob to the desired setting.
There are five settings:
• Off
• WhisperClean
nighttime operation or for constant
low-speed filtration.
• Medium – Provides a higher fan
speed; use to quickly filter dust,
pollen, smoke, etc., from a room.
• QuickClean
during acute needs.
• Auto – Functions with the Air
Quality Sensor and automatically
selects the fan speed depending
on the air quality detected. This
is the normal setting for
continuous use.
AIR
QUALITY
Poor
Fair
Good
™
– Use for quiet,
™
– Provides cleaning
AUTO SELECTED
FAN SPEED
QuickClean ™
Medium
WhisperClean ™