Philips HR1858 Mode D'emploi page 8

ENGLISH
8
After you have processed all ingredients and the juice fl ow has stopped, switch the appliance off and
wait until the fi lter has stopped rotating.
Tips
- Use fresh fruit and vegetables, as they contain more juice. Pineapples, beetroots, celery stalks,
apples, cucumbers, carrots, spinach, melons, tomatoes, pomegranates, oranges and grapes are
particularly suitable for processing in the juice extractor.
- You don't have to remove thin peels or skins. Only thick peels, e.g. those of oranges, pineapples
and uncooked beetroots need to be removed.
- When preparing apple juice, remember that the thickness of the apple juice depends on the
kind of apple you are using. The juicier the apple, the thinner the juice. Choose a kind of apple
that produces the type of juice you prefer.
- Apple juice turns brown very quickly. You can slow down this process by adding a few drops of
lemon juice.
- Fruits that contain starch, such as bananas, papayas, avocados, fi gs and mangoes are not suitable
for processing in the juice extractor. Use a food processor, blender or bar blender to process
these fruits.
- Leaves and leaf stalks of e.g. lettuce can also be processed in the juice extractor.
- Drink the juice immediately after you have extracted it. If it is exposed to air for some time, the
juice will lose its taste and nutritional value.
- To extract the maximum amount of juice, always press the pusher down slowly.
- The juicer is not suitable for processing very hard and/or fi brous/starchy fruits or vegetables
such as sugar cane.
Cleaning
, The appliance is easier to clean if you do so immediately after use.
Do not use abrasive cleaning agents, scourers, acetone, alcohol etc. to clean the appliance.
,
, All detachable parts are dishwasher-safe.
, Place the detachable plastic parts on the top tray of the dishwasher. Make sure they are
placed well away from the heating element.
1 Switch the appliance off, remove the plug from the wall socket and wait until the fi lter has
stopped rotating.
2 Remove the dirty parts from the motor unit. Dissassemble the appliance in the following
order:
- Remove the pulp container;
- Remove the pusher;
- Open the clamps;
- Remove the lid.
3 Remove the juice collector together with the fi lter. (Fig. 10)
4 Clean these parts with a cleaning brush in warm water with some washing-up liquid and
rinse them under the tap. (Fig. 11)
5 Clean the motor unit with a damp cloth.
Never immerse the motor unit in water nor rinse it under the tap.
Environment
, Do not throw the appliance away with the normal household waste at the end of its life, but
hand it in at an offi cial collection point for recycling. By doing this you will help to preserve
the environment. (Fig. 12)
All manuals and user guides at all-guides.com