Télécharger Imprimer la page

Philips HR1858 Mode D'emploi page 6

Masquer les pouces Voir aussi pour HR1858:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
All manuals and user guides at all-guides.com
ENGLISH
6
Introduction
Your new juicer has a special, slightly tilted design that leans 5 c to the side of the juice outfl ow
opening to ensure maximum juice output.
General description (Fig. 1)
A
Pusher
B
Feeding tube
C
Lid
Filter
D
E
Juice collector
F
Pulp container
Clamps
G
H
Control knob
I
Driving shaft
J
Motor unit
K
Juice jug lid
L
Foam separator
M
Juice jug
Important
Read these instructions for use carefully before using the appliance and save them for future
reference.
Check if the voltage indicated on the base of the appliance corresponds to the local mains
,
voltage before you connect the appliance.
,
Do not use the appliance when the mains cord, the plug or other components are damaged.
If the mains cord is damaged, it must be replaced by Philips, a service centre authorised by
,
Philips or similarly qualifi ed persons in order to avoid a hazard.
,
This appliance is intended for household use only.
Keep the appliance out of the reach of children.
,
,
Never let the appliance operate unattended.
Never use accessories or parts made by other manufacturers or that have not been
,
specifi cally recommended by Philips. Your guarantee will become invalid if you use such parts
or accessories.
Check the fi lter every time you want to use the appliance. If you detect any cracks or
,
damage, do not use the appliance and contact the nearest Philips service centre.
,
Make sure all parts are correctly mounted before you switch on the appliance.
Only use the appliance when both clamps are locked.
,
,
Do not operate the juicer for more than 40 seconds at a time when juicing heavy loads and
let it cool down suffi ciently afterwards. None of the recipes in these instructions for use
constitute heavy loads.
,
Never reach into the feeding tube with your fi ngers or an object while the appliance is
running. Only the pusher is to be used for this purpose.
Only unlock the clamps after you have switched the appliance off and the fi lter has stopped
,
rotating.
,
Do not remove the pulp container when the appliance is in operation.
Do not touch the small cutting blades in the base of the fi lter.
,
,
Always unplug the appliance after use.
Never immerse the motor unit in water or any other liquid. Do not rinse it either.
,

Publicité

loading