Electrolux ESI64060 Notice D'utilisation page 7

3. Use the funnel to fill the salt container
with salt.
USE OF RINSE AID
Caution! Only use branded rinse aid
for dishwashers.
Do not fill the rinse aid dispenser with
other products (e.g. dishwasher clean-
ing agent, liquid detergent). This can
cause damage to the appliance.
Rinse aid makes it possible to dry the
dishes without streaks and stains.
Rinse aid is automatically added during
the last rinsing phase.
Do these steps to fill the rinse aid dispens-
er:
1. Press the release button (A) to open the
rinse aid dispenser.
All manuals and user guides at all-guides.com
4. Remove the salt around the opening of
5. Turn the cap clockwise to close the salt
When you set electronically the water soft-
ener to level 1, the salt indicator light does
not stay on.
2. Fill the rinse aid dispenser with rinse aid.
3. Remove the spilled rinse aid with an ab-
4. Close the rinse aid dispenser.
Adjusting the rinse aid dosage
The rinse aid is set at the factory at position
4.
You can set the rinse aid dosage between
position 1 (lowest dosage) and position 6
(highest dosage).
the salt container.
container.
It is normal that water overflows from
the salt container when you fill it with
salt.
The mark 'max.' shows the maximum
level.
sorbent cloth to prevent too much foam
during the subsequent washing pro-
gramme.
electrolux 7