Pioneer DEH-P8600MP Mode D'emploi page 43

TV tuner
Storing the strongest
broadcast stations
sequentially
1
2
1 Function name tag
Shows the function currently selected in
highlighted manner.
2 Function display
Shows the function status.
1 Press MULTI-CONTROL to display the
main menu.
FUNCTION, AUDIO and ENTERTAINMENT
appear on the display.
2 Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option; press to se-
lect.
The function name tag BSSM is highlighted.
3 Press MULTI-CONTROL to turn BSSM
on.
Searching begins to flash. While Searching is
flashing the 12 strongest broadcast stations
will be stored in order from the lowest channel
up. When finished, the preset channel list ap-
pears.
# To cancel the storage process, press
MULTI-CONTROL.
4 Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station; press to select.
# You can also change the station by pushing
MULTI-CONTROL up or down.
# To return to the channel display, press
BAND/ESC.
Notes
! Storing broadcast stations with BSSM may re-
place broadcast stations you have saved
using P01P12.
! If you do not operate the function within about
30 seconds, the display is automatically re-
turned to the TV picture.
Selecting stations from the
preset channel list
The preset channel list lets you see the list of
preset stations and select one of them to re-
ceive.
1 Turn MULTI-CONTROL to switch to the
preset channel list mode.
2 Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station; press to select.
# You can also change the station by pushing
MULTI-CONTROL up or down.
# To store the currently received station in mem-
ory, press and hold MULTI-CONTROL until the
selected preset number stops flashing.
# To return to the channel display, press
BAND/ESC.
Section
09
43
En