orangemarine W700 Serie Manuel D'utilisation page 35

than 15 minutes at a time under loading. Allow an interval of 30 minutes after
each operation.
9. For windlasses with capstan model only:
You may operate the capstan only, by loosening the nut on the top of the capstan
approx. one turn and the windlass drive shaft will drive only the capstan but not the
gypsy.
10. Emergency manual retrieval:
For W700 and W1100 without capstan:
If there is a power failure or unit failure, you can remove the gypsy cover and the
torque limiter and attach the crank to the gypsy for manual operation.
For W1500 without capstan:
By loosening the nut on the top of the gypsy approx. one turn and attach the crank(not
included) to the gypsy for manual operation.
For windlasses with a capstan:
You need to remove the capstan from the drive shaft and attach the crank to the gypsy
for a manual operation.
11. The chain tunnel cover can be opened by lifting it up for
approximately 3mm and turning it sideway.
34 ENG