Publicité
Les langues disponibles
Les langues disponibles
EN
Legend
1
Key
2
Screw nut for mounting FTH073-VP
3
Holes for wall mounting (4-6 pcs)
4
Cable entries (6 pcs)
5
Bracket for annunciators
6
Screw nuts for adjusting bracket position (4 pcs)
7
Tapping holes for installing annunciators (16 pcs)
8
Holes for conduit box mounting (8 pcs)
9
Earth ground connection (pre-wired)
Supported annunciators
The FTH2073-UA is used for installing annunciators.
Supported annunciators:
• FSD901
• FT2008/FT2009
• FT2018/FT2019
• FT2014/FT2015
• SSD
Package contents
The following are included in the scope of delivery:
FTH2073-UA
⚫
Installation instructions
⚫
Safety instructions
Risk of injury to people and damage to
property
Please observe the following safety instructions:
The devices are only intended for stationary installation in
⚫
dry rooms.
Ware safety shoes while mounting the device.
⚫
A6V11272327_----_d
Mounting FTH2073-UA and annunciators
1. Ensure the wall is dry, clean, flat and firm on which the
enclosure is installed.
2. Break the required cable entries (4).
3. Mark the drilling points for the 3 wall mounting holes (3) with
the same direction, drill the holes and insert the expansion
bolts and tighten the screws; or use the pre-drilled mounting
holes for installation on a 1-gang, 2-gang, or 4" square
standard electrical box.
4. Drag cables into the enclosure.
5. Hang the enclosure on the screws and open the housing
using the key (1) included in the package.
6. Tighten the screws to fix the enclosure on the wall.
7. Drag the cables into an annunciator, and then select
corresponding tapping holes (7) to mount the annunciator.
The enclosure can be installed upside-down as
needed. When it is installed upside-down, reinstall
the bracket (5) to ensure the arrow on it facing up.
General information
Dimension (inch)
15.5 x 11 x 4.05
(W x H x D)
Weight
8.36 lb
Storage
14...140 ° F
Humidity
≤93% rel.
Operating location
Indoor/dry
Color
Black
Ordering information
Type
FTH2073-UA
Material no.
S54433-A6-A1
Part no.
102113253
Description
Universal Enclosure f/Annun
2
Publicité
