NAX 3001S Mode D'emploi Original page 40

Any changes in the construction of the device made by the user may affect the safety of use of the machine and release the manufacturer
from liability for damage or injuries.
RESIDUAL RISKS
Despite the fact that the machine manufacturer bears responsibility for its construction eliminating danger, certain elements of risk during
operation are unavoidable. The residual risk arises from the erroneous behavior of the machine's operator.
The greatest danger occurs when performing the following prohibited activities:
 use of the device by children,
 use of the machine for other purposes than described in the Operation Manual,
 when other people, especially children or animals are nearby,
 use of the device by people not acquainted with the operation's manual,
 using the device without proper, protecting operating clothing and footwear protecting foot,
 using the device with damaged covers or casing and without properly installed safety devices.
When observing the instructions in the operating manual, the residual hazards of using the machine may be eliminated. There is a risk in
case of failure to comply with the above recommendations.
USAGE
The device is intended only for mowing lawns in accordance with the description and safety rules contained in these instructions for use.
Other applications may be dangerous to users and may cause damage to the equipment.
The machine should not be used to:

collecting leaves or cleaning the area of dry plants,

leveling molehills,

cutting bushes,

chopping branches.
ADDITIONAL INFORMATION FOR THE USER
Performing maintenance and adjustment work before or after the season can be a problem even for advanced users. To meet these
needs, the NAX brand would like to offer you a paid service consisting of preparing the machine for storage and / or work. The scope of
this service may include: spark plug replacement, cleaning, maintenance, oil change, filter replacement and lubrication of moving parts,
knife sharpening and balancing, as well as other work related to the adjustment and maintenance of equipment. This will ensure long-term
and reliable operation and safety of the device.
PREPARING FOR OPERATION
The mower is supplied by the manufacturer in a cardboard packaging in a partially disassembled state. After reading the operating
manual and assembly drawings, it should not be too difficult to assemble the mower. All necessary components for assembly are included
in the packaging. This operation manual applies to various models of mowers. The mower described may differ from your purchase. Read
the passages that refer to the device model you have.
CONSTRUCTION OF PETROL MOWER
Illustrative drawings can be found on page 4, Rys.(Fig.) 1-2.
40 EN