Publicité
Les langues disponibles
Les langues disponibles
3
INSTALL DIVERTER TRIM AND HANDLE
n
When finished tiling the wall, remove PLASTER GUARD.
n
Place ESCUTCHEON (1) onto ESCUTCHEON HOLDER (2).
n
Thread ESCUTCHEON HOLDER (2) onto DIVERTER VALVE (3).
Tighten until ESCUTCHEON (1) is snug against finished wall.
n
Install HANDLE SKIRT (4) onto VALVE STEM (5).
n
Push DECORATIVE RING (6) onto LEVER HANDLE (7).
n
Align LEVER HANDLE (7) and push onto
HANDLE SKIRT (4). Install HANDLE
SCREW (8) and tighten.
n
Push INDEX CAP (9) into
LEVER HANDLE (7).
4
INSTALL WALL SUPPLY
NOTE: REFER TO INSTALLATION INSTRUCTIONS (M968637) SUPPLIED WITH WALL
SUPPLY FOR COMPLETE INSTALLATION AND REPAIR PART INFORMATION.
n
Supply to WALL SUPPLY is 1/2" NPT. See rough-in above for detailed information.
n
Apply sealant or sealing tape to threads of 1/2" NPT supply nipple.
5
INSTALL HAND SHOWER SLIDE BAR
NOTE: REFER TO INSTALLATION INSTRUCTIONS
(M968637) SUPPLIED WITH SHOWER SYSTEM
KIT FOR COMPLETE INSTALLATION AND
REPAIR PART INFORMATION.
WARNING: NOT DESIGNED TO BE A GRAB BAR.
n
The height and location of the SLIDE BAR is optional.
It can be installed to the right or left side of the
R120SS VALVE.
2-1/2"
(64 mm)
33-3/8"
(848 mm)
35-3/8"
(899 mm)
3-3/8"
(86 mm)
CARE INSTRUCTIONS:
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH
WITH A COARSE SURFACE.
4
6
8
9
7
6
INSTALL HOSE AND HAND SHOWER
TEST SHOWER SYSTEM
NOTE: REFER TO INSTALLATION INSTRUCTIONS
n
Place the HAND SHOWER into the SLIDE BAR after all
hose connections are made. The installation of the
SHOWER SYSTEM KIT is now complete.
n
Turn on water supplies and check all fuctions of of the
SHOWER SYSTEM KIT. Check for any leaks.
- 3 -
2
5
(M968637) SUPPLIED WITH SHOWER SYSTEM
KIT FOR COMPLETE INSTALLATION AND
tREPAIR PART INFORMATION.
1660767.002
HAND SHOWER
(2.5 GPM)
1660766.002
HAND SHOWER
(1.5 GPM)
3
1
PLASTER GUARD
1/2" NPT
APPLY SEALANT
OR SEALING TAPE
M985054 Rev. 1.0 (4/21)
Publicité
