Panasonic ES-LF71 Mode D'emploi page 10

Lubrication
To maintain shaving comfort for a long time, it is recommended
that the oil provided with the shaver is used.
1. Switch off the shaver.
. Apply one drop of oil to each of the outer foils.
. Raise the trimmer and apply a drop of oil.
4. Switch the shaver on, and run it for
approximately five seconds.
5. Switch off the shaver, and wipe off any excess
oil from the outer foils with a soft cloth.
•
It is not necessary to oil the blades after
cleaning the shaver with the self‑cleaning
recharger. (Lubricant is included in the cleaning
detergent.)
Cleaning with the brush
Clean the inner blades using the
short brush by moving it in direction
(A).
Clean the system outer foil, the
shaver body and the trimmer using
the long brush.
•
Do not move the short brush in
direction (B) as it will damage the
inner blades and affect their
sharpness.
•
Do not use the short brush to
clean the outer foils.
10
ES-LF71_EU.indb 10
(A) (B)
Replacing the system outer foil and the inner blades
system outer foil
inner blades
Replacing the system outer foil

1. Press the foil frame release buttons and lift
the outer foil section upwards.
. Press the system outer foil release buttons
and pull down the system outer foil.
. Align the foil frame mark ( ) and the
system outer foil mark ( ) and securely
attach together.
•
The system outer foil cannot be reversely
attached.
•
Always insert the system outer foil to the
foil frame when attaching to the shaver.
4. After turning the foil frame mark (
front, securely attach the outer foil section to
the shaver until it clicks.
Replacing the inner blades

1. Press the foil frame release buttons and lift
the outer foil section upwards.
. Remove the inner blades one at a time.
•
Do not touch the edges (metal parts) of
the inner blades to prevent injury to your
hand.
. Insert the inner blades one at a time until
they click.
once every year
once every two years
) to the
2011/03/03 11:44:29