Fromm & Starck STAR ATFE 22 Manuel D'utilisation page 32

INSTALLING THE DESK TOP
Turn the top console (10) with the holes up. Install the camlock bolts (N) and

the wooden pegs (O) in the holes. Install the camlock nuts (M) in the respective
recesses before installing the camlock bolts (N).
Mount the side shelves (11) over the pegs installed on the top console (10).

Place the panel (12) on the edge of the top console (10) to butt the side shelf

(11).
Secure the parts using the countersunk nut (L) as shown in the figure below.
