FHL Easy 850249 Mode D'emploi page 20

The external flexible cable (power supply) for this lamp cannot
•
be replaced. If the cable is damaged, the lamp must be
scrapped.
The replacement illuminant must not have cool beam properties.
•
Cool beam illuminants can overheat and damage the lamp or seat.
Live wire Zero wire
(phase) (blue)
(black or brown)
Switch the lamp off and wait until it cools down before cleaning it. Make sure that moisture cannot
penetrate the terminal boxes or contact live parts. Use only a damp cloth to clean the lamp. If you use
a cleaner, check it beforehand on parts that are concealed or not visible. Never use aggressive or
abrasive cleaners because these may damage the lamp (e.g. specking). Leave the lamp top dry
thoroughly after cleaning before switching it on again.
Earth wire Protection
(yellow/green) class I
Lamp with
earth wire
Instructions for care
Protection Protection
class II class III
Lamp without Lamp for
Earth wire protective low
voltage (SELV)
Protection Protection
class II symbol class III symbol
F-sign Minimum safety
Suitable for distance to
normal illuminated
inflammable objects which is
securing to be maintained
surfaces (refer (refer to
to specification) specification)
COOL
BEAM
Network Network
connection connection
symbol house symbol lamp
side side