Publicité
Les langues disponibles
Les langues disponibles
563 mm/22.2"
Fig. 1
Ensure brackets are securely
fastened. Fit Timber slats if
necessary
3. To install the hanging hook to timber, start at Fig 2.
4. Align hanging hooks and fasten screws tightly.
5. Please adjust the exhaust connector direction, then, match the
exhaust connector onto the connector. Please referto Fig 3.
6. Turn the exhaust connector clockwise, until it insert into the
connector's groove.
7. Using4 X12mm screws (provided) to fix the 2 spacers as per
Fig4.
8. With assistance, mount dryer on wall bracket. See Fig. 5.
Ceiling
580 mm/22.8"
16
Fig. 2
Hanging Hook
25mm long screws
Timber( not included )
Fig. 3
Exhaust
Connector base
connector
Fig. 4
Spacers
12mm long screws
17
EN
Publicité
