Publicité
Les langues disponibles
Les langues disponibles
Installation Instructions
This dryer can not be used upside down
Where to place your dryer
Place the dryer in a dry well ventilated area. It should be positioned
away from heat and direct sunlight.
If the dryer is not wall mounted, it must be placed on firm horizontal
ground. Do not place the dryer on carpet as this will block the intake.
There should, be at least 15 cm/6" between the dryer and the walls.
The dryer comes with fixed legs that need to be assembled to ensure
stability.
Leg
If the dryer is rack mounted. A
secure bracket is required to
ensure stability and prevent
vibration.
At least 15 cm/6" between the
dryer and walls is required(The
bracket is not included).
15 cm/6"
Bracket
14
Wall Mounting Instructions
1. Determine dryer position on wall and mark required bracket
position. This dryer is not suitable to be directly placed on top of
a washing machine.
* A minimum 50mm is needed between the top of the dryer and the
ceiling for ease of installation.
* If mounting above a washing machine, allow sufficient room to
open the lid of the washer.
Tools required
Tools & parts
Drill & 3mm Bit
required for
Philips Head Screw Driver
Plaster/wooden
Wood Screws, φ 12x
wall
50mm Timber Screws
Helper to lit dryer onto wall
Wall Mounting Kit Includes
Hanging brackets
Plastic Spacers
Description
Exhaust connector
12mm Long Screws
25mm L ong Screws
2. Fix the wall hanging brackets (2 supplied) to the wall securely
(eg. into the stud.) Fit a timber slat between the studs to mount the
brackets onto if the stud position is too wide.
1
1
4
1
2
2
1
4
4
15
EN
Publicité
