Publicité
EN
Assembly Instruction
Do not throw away the white rail sleeve of the upper rails
and lower rails. It must be installed and used with the
product.
Upper rail
Left
Lower rail
Left
Connect the left, middle and right rails in order until the button pops out from
the slot.
Adjustable
button
Connecting hole
Gear hole
Connect the left & right lifting rod with the left & right L-shaped base in the
direction as the arrow.
06
Pass the upper and lower rails through the mesh panel.
Right
When installing the mesh panel, the side with zipper and warning faces
outwards.
Right
Installed
Insert the rail into the slot until the button protrudes from the slot, and the
zipper or printed side faces outwards.
Pass the side part of the mesh panel through the lifting rod and pull up the
zipper. Check the firmness of the guardrail. If there is no obvious wobble, the
assembly is complete.
EN
Connect the
Connect the
upper rail
lower rail
07
Publicité
