OHAUS Frontier FC5513R Mode D'emploi page 12

TM
Frontier Centrifuge FC5513&FC5513R
2.4 Safety precautions during operation
•
Do not operate the centrifuge in case it is not installed correctly.
•
Do not lean on the centrifuge during operation.
•
Do not stay within the 30 cm clearance envelope longer than necessary for operational reasons.
•
Do not place any potentially hazardous materials within the 30 cm clearance envelope.
•
Do not operate the centrifuge when disassembled (e.g. without housing).
•
Do not run the centrifuge when mechanical or electrical components have been tampered with.
•
Do not use accessories such as rotors and buckets, which are not exclusively approved by OHAUS
Corporation, except commercially available centrifuge tubes made of glass or plastic.
•
Do not spin extremely corrosive substances, as they may damage or weaken the materials.
•
Do not operate the centrifuge with rotors or buckets, which show any signs of corrosion or mechanical damage.
The manufacturer is responsible for safety and reliability of the centrifuge, only if:
•
The unit is operated in accordance with this instruction manual.
•
Modifications, repairs, or other adjustments are performed by authorized personnel and the electrical
installation complies with the relevant electrical codes.
EN-7