LG ProBeam BF50NST Manuel D'utilisation page 71

20
Tips for Using a USB storage device
•
A USB storage device that has a built-in automatic recognition program or uses
its own driver might not be recognizable.
•
Some USB storage devices may not be supported or may not work properly.
•
If you use a USB extension cable, the USB storage device may not be recognized
or may not work properly.
• Please use only USB storage devices formatted with the FAT32 or NTFS file
system provided by Windows OS.
•
It is recommended that you use an external USB HDD with a rated voltage of 5
V or less and a rated current of 500 mA or less.
•
It is recommended that you use a USB hub or hard disk drive with a power
supply. (If the power supplied is not sufficient, the USB storage device may not
be detected properly.)
•
It is recommended that you use a USB stick of 32 GB or less or a USB HDD of 2
TB or less.
•
If a USB HDD with power-saving function does not work, turn the hard drive off
and on again to make it work properly. See the owner's manual for the USB HDD
for more information.
•
Data on a USB storage device may be damaged, so it is recommended that you
back up any important files. Users are responsible for data management. The
manufacturer bears no responsibility.
•
Press the button on the remote control. To remove the USB storage
device, press the Eject (
the USB storage device you want to remove. If you disconnect the USB storage
device without selecting [EJECT], an error may occur in your projector or storage
device.
•
For more information on other connection methods, go to
[Connection]
•
Press the button on your remote control. Select the connected USB from
[Home Dashboard]
the USB storage device. After format, all the data of USB storage device will be
deleted and formatted as NTFS or FAT32 file system.
•
When connecting a USB storage device, a random file/folder can be created to
provide Smart projector services such as the saving and retrieving of thumbnail
images.
) button, which appears at the top when you focus on
[Device Connector].
[INPUTS] and select the [FORMAT] button to format
(Q. Settings)