LG ProBeam BF50NST Manuel D'utilisation page 112

[Device Connector]
(Q. Settings)
This feature is to enable you to easily set the connection between the projector and
external device.
Follow instructions in [Device Connector].
[Mobile Projector On]
(Q. Settings)
If [Turn on via Wi-Fi] is set to [On], you can turn on your projector using an application
that supports [Mobile Projector On] or see the screen of the application on your
projector.
•
The [Turn on via Wi-Fi] feature must be used in an app on a smart device that
supports the feature.
•
The projector should be connected to a network.
•
The projector must be plugged in.
•
The projector and the device to be used should be connected to the same
network.
•
To connect for the first time, make sure the device to be used is ready to
connect.
•
Some models may not be supported.
[Connection] [Device Connector]
[Connection] [Mobile Projector On]
61