LG ProBeam BF50NST Manuel D'utilisation page 57

6
Network Setting
Network Setting
If you conigure settings for the network, you can use various services such as online
contents and applications.
Setting a Wired Network
1
Connect the LAN port of the projector and the router using a LAN cable. The
router should be connected to the Internet beforehand.
2
Press the (Q. Settings) button on the remote control and select
[Connection]
•
If the router supports DHCP, the projector is automatically connected to the
network when you connect the projector to the network with a LAN cable.
Setting a Wireless Network
1
Turn on the power of the router connected to the Internet.
2
Press the (Q. Settings) button on the remote control and select
[Connection]
3
When the network search is complete, the list of networks available for
connection is shown.
4
Select a network to connect. If your Wireless Router is password protected,
enter the password conigured for the router.
[Wired Connection (Ethernet)].
[Wi-Fi Connection].