Positioning The »Ibell; Positioning The Mobile Phone; Call/Text Message Received Confirmation - HumanTechnik iBell Mode D'emploi

Positioning the »iBell«
Place the »iBell« on a flat, non-vibrating surface.
Suitable surfaces:
Unsuitable surfaces:

Positioning the mobile phone

Positioning the mobile phone
1. Switch your mobile phone to vibration alarm.
If your mobile phone has different vibration rhythms, select the alarm with
the longest and strongest vibration.
2. Carefully place your mobile phone into the »iBell's« housing.
Please note: if the mobile phone is not inserted carefully, the vibration
alarm could make the »iBell« start to blink.
If that happens, press the reset button to acknowledge the signal.

Call/text message received confirmation

After receiving a call or a text message, you must confirm it has been received
so that the »iBell« can report new calls or text messages.
Press the reset button on the front of the »iBell« to acknowledge the signal.
The device has now been reset and can report new calls and text messages
again.
tables, shelves etc.
tumble dryers, washing machines etc.
English 17