How It Works; Starting Device; Inserting The Batteries; Ready Indicator/Battery Indicator - HumanTechnik iBell Mode D'emploi

How it works

When the mobile phone in the »iBell« receives a text message or call, the
»iBell« uses vibration sensors to detect the mobile phone is vibrating and
triggers a blue chaser light to attract attention.
For the first 2 minutes after a call is received, the light blinks continually.
After 2 minutes, blinking slowly decreases and eventually disappears com-
pletely.

Starting device

Inserting the batteries

The device needs three 1.5 V batteries (AA type) to work.
To insert the batteries, proceed as follows:
1. Press down the lid of the battery compartment on the back of the »iBell«.
2. Now insert three AA type batteries into the battery compartment.
Ensure the right polarity is selected for the batteries.
3. Now close the battery compartment lid.
As soon as the batteries have been inserted, a signal will sound and a blue
chaser light on the »iBell« will briefly blink.

Ready indicator/battery indicator:

Ready indicator/battery indicator:
The blue LED at the top left will indicate that the device is on.
• If it blinks every 15 seconds it means that:
your batteries are full.
• Constant blinking means that:
the batteries are weak, please exchange them.
If the batteries are too weak, the device will switch off automatically.
16 English