Publicité
Les langues disponibles
Les langues disponibles
1.
Position the convector heater so that it stands upright on a heat resistant flat surface and at a safe distance from wet
environments and flammable objects.
2.
Connect the convector heater to the mains.
3.
Turn the temperature control knob clockwise. You will hear a clicking sound when the temperature controller is on.
Adjust the temperature control knob to the desired temperature level.
4.
Turn the Power selection knob to select between 4 functions: 0 (Off), I 800W (Low), II 1200W (Medium), III 2000W (High)
6.
Turn the power selection knob to "0" to turn off the convector heater. Turn the temperature control knob anticlockwise to
the initial positionn and remove the power plug from the mains.
SAFEGUARD
The heater is provided with an overheating protection.
Overheating protection
When the heater gets too hot due to the ambient temperature or as a result of prolonged use, the heater switches off
automatically. Allow the heater to cool before you switch it on again.
Before cleaning the heater, switch it off and remove the plug from the socket. Allow the heater to cool down fully before
cleaning or storing it. Regularly clean the heater. At least once per seasonal use.
• Clean the exterior of the appliance with a dry cloth only.
• If necessary, you can clean the protective grille by means of a vacuum cleaner (nozzle).
• Do not use aggressive or abrasive cleaning agents for cleaning the appliance.
• Never submerge the heater in water or any other liquid.
• Store the heater in its original packaging on a cool, dry place.
First check the following if your heater is not working.
• Check the fuses in the meter cupboard.
• Check that the plug is properly inserted in the socket and that the socket receives power.
• Keep the heater clean. Dust, dirt and/or contamination in the heater are common causes of overheating. Make sure that
such contamination is removed regularly.
• If the heater suddenly stops while heating, it is possible that the overheating protection is activated. Switch off the heater,
remove the plug from the socket and allow the heater to cool down. Switch on the heater according to the instructions, after
it has cooled down.
This symbol means that this product should not be disposed of with regular household waste (2012/19/EU).
Observe the applicable rules in your country for the separate collection of electric and electronic products.
By disposing of the product correctly, you prevent negative consequences for the environment and for public health.
The packaging material of this product can be recycled 100%, return packaging material separately.
USING THE CONVECTOR HEATER
CLEANING AND MAINTENANCE
BREAKDOWNS AND SOLUTIONS
RECYCLING
EN - 12
Publicité
