EVGA SuperNOVA GM Serie Manuel D'utilisation page 4

3. Use the screws provided with your case to install the power supply
into your computer. NOTE: It is recommended to install the power
supply with the fan facing down. However, if your case places the
power supply at the bottom of the case and there are no ventilation
holes available, it may be best to install the power supply with the
fan facing up for greater e ciency and reliability.
4. Connect the 24-Pin ATX cable to the PSU and the motherboard.
5. Connect the 4+4-Pin EPS12V cable to the motherboard.
(Optional) – If you plan on extreme overclocking
supports additional 8-Pin or 4-Pin CPU power connectors,connect the
second 4+4-Pin EPS12V cable. This is only needed for heavy overclocking
or for Dual CPU motherboards.
6. Connect the 6/6+2-Pin PCI-E cables to your graphics card(s).
NOTE: Do not attempt to plug an 8-Pin PCI-E cable into a 6-Pin
connector without rst detaching the two extra pins.
7. Connect SATA power cables to all data drives or optical drives
(hard drives, solid state drives, optical drives).
8. Connect the peripheral "Molex" 4-Pin connectors for fans, pumps,
legacy components and other devices/adapters.
9. Connect the AC power cord to your power supply and to the wall.
Check all connections to assure a solid connection and turn the
power switch on the power supply to the ON position.
English
450W / 550W / 650W / 750W / 850W GOLD
Power Supply User Manua l
and your motherboard
4
Q&A
more than four screw holes
Q: I see there are on the back of the power supply, but the packaging only o ers (4)
screws, are some missing?
A: Nothing is missing; you will only need to attach the EVGA power supply to the case with four screws. The
power supply o ers more than (4) holes to provide optimal compatibility
Q: My EVGA Power Supply includes (2) EPS cables
A: Motherboards only require (1) 4+4 or 8-Pin EPS
connection on the motherboard may be found for
motherboard supports dual 4+4-Pin EPS connections, please refer to your
for details on the proper function and power of the EPS connections.
ECO Thermal Control System?
Q. What is the
A. The ECO Thermal Control System, allows the fan on your EVGA power supply to shut o during ow to moderate
operation loads. The EVGA power supply's fan will automatically turn back on
the power supply reaches. The fan will also increase in RPM when needed, based on the load operation being
requested from the components connected. This prevents unnecessary rotation, levels and will
span of the fan due to the fan not spinning when not required.
Q. What if I want to use power adapters for my graphics card(s)/motherboard/peripherals?
A. EVGA always recommends the use of direct power connections from the power supply to power all components.
Q. Does it matter which end of the cable I plug into the power supply?
A: Yes, the connections going to the power supply will not have "break downs" like the EPS (CPU) has 4+4 on one
Check each cable
side and full 8-Pin on the other.
''matching"
and connect only the same cable directly to the power supply as referenced on each connector.
Q. If I have an issue or a question, can I get support?
A. ALL EVGA products are backed by top tier warranties as well as technical support. Support can be reached
for your power supply at:
- USA: +1-888-881-3842 option 1, option 3. or contact us via email at
- Europe: +49 89 189 049 11 or by email via eu.evga.com/support
450W / 550W / 650W / 750W / 850W GOLD
Power Supply User Manual l
for today's varied case designs.
for my motherboard, do I need to connect up both?
connection. On some models, an additional 4+4-Pin or 8-Pin
dual CPU con gurations or for extreme overclocking. If your
motherboard manufacturer's manual
when needed, based on the loading
increase the life
as it is labeled appropriately to match the power supply side,
support@evga.com .
.
5 English