Publicité
Les langues disponibles
Les langues disponibles
YOUR CANOPY HOOD
Extraction systems
Depending on the type, the cooker hoods can
be connected in different ways:
1. To a duct. The cooking vapours extracted by suction are carried
outside, once the grease particles have been filtered (B1). This is
the best method.
2. Recirculation hood (only models GWA722KOR and GWA820RVS).
When the hood is connected as a recirculation hood, the grease
particles and odour in the extracted vapours are filtered.
The extracted air is not carried outside but recirculates in the
kitchen (B2). In this case you must have a carbon filter fitted.
3. As a motorless exhaust hood (only model MWA130KOR).
This model is only suitable for installation in combination with a
mechanical ventilation circuit.
B1
Attention! The carbon filter needs to be ordered separately.
B2
B1
B2
EN 5
Publicité
