Publicité
Les langues disponibles
Les langues disponibles
Installation
Note:
For valve body installation, please
see valve body manuals.
1) Install shower escutcheon (J) to
shower valve. Secure with two
screws (I).
J
I
2) Install diverter escutcheon (H) to
diverter valve. Secure with two
screws (G).
H
G
3) Install dome covers (F) to valves.
Turn clockwise to secure.
F
F
4) Install handles (D) to valves.
Secure with set screws (E).
D
E
D
E
Note: Handles should be facing the
6 o'clock position.
5) Install tub spout (K) to pipe fitting.
Turn clockwise to secure.
K
6) Attach shower arm (B) and flange
(C) to vertical shower pipe. Turn
clockwise to tighten.
C
B
4
7) Install showerhead (A) to shower
arm (B). Turn clockwise to tighten.
A
8) Remove slide bar ends (N1) from
slide bar flanges. Using flanges
as a guide, drill 1/8" pilot holes
2
into studs or wood blocking.
With slide bar (N) in position,
secure to wall using screws (M).
Attach slide bar ends (N1) to bar
flanges.
M
N1
Note: Slide bar must be secured
with at least two of the three
screws (M) at each end.
9) Disassemble slide assembly (P).
N4
B
N
N1
N2
N3
Publicité
