S-6600, S-6600TS, S-6601, S-6602
Operation & Maintenance Manual
Model Numbers
S-6600
Unity Shower Valve
S-6600TS
Unity Tub/Shower Valve
S-6601
Unity Shower System
S-6602
Unity Tub/Shower System
Modifications
-1.5
1.5 gpm (5.7 L/min) flow restrictor
-2.0
2.0 gpm (7.6 L/min) flow restrictor
-143
Euro-Flo three mode showerhead in place
of Clear-Flo
-145
Euro-Flo five mode showerhead in place of
Clear-Flo
-231
Super showerhead in place of Clear-Flo
-SS
Slip spout on any tub/shower unit
-X
Integral service stops
-CHKS
Integral check stops
-IPS
1/2" female IPS connections
-REV
Reverse coring for back to back
installations
-LP
Loop handle
-OP
13" oval plate
-L/HD
Less showerhead
-TRM
Trim only, valve not included
-STN
Satin Nickel finish
Note: Append appropriate -suffix to model number.
Unity
™
Specification
S-6600/S-6601
Shower system powered by the Temptrol
Balancing valve. Features adjustable stop screw to
limit handle turn, integrated volume control, 1 mode
showerhead with easy to clean rubber nozzles and
standard 2.5 gpm (9.5 L/min) flow restrictor. Components
made from metal and nonmetallic materials plated in
standard polished chrome finish.
S-6600TS/S-6602
Tub/shower system powered by the Temptrol
Balancing valve. Features adjustable stop screw to limit
handle turn, integrated diverter, non-diverter tub spout,
1 mode showerhead with easy to clean rubber nozzles
and standard 2.5 gpm (9.5 L/min) flow restrictor.
Components made from metal and nonmetallic materials
plated in standard polished chrome finish.
Compliance
-ASME A112.18.1/CSA B125.1
-WaterSense 1.5 gpm (5.7 L/min)
For California Residents
WARNING: This product contains chemicals known to
the State of California to cause cancer, birth defects, or
other reproductive harm.
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
2.0 gpm (7.6 L/min)
®
Pressure
®
Pressure
Certi ed by
CSA Group