Samsung 4 Serie Mode D'emploi page 32

Listening through a Receiver (Home theater)
You can listen to sound through a receiver instead of the TV speaker.
1. Press the TOOLS button. Press the ENTER E button to select Anynet+ (HDMI-CEC).
2. Press the ▲ or ▼ button to select Receiver. Press the ◄ or ► button to select On or Off.
If your receiver supports audio only, it may not appear in the device list.
N
The receiver will work when you have properly connected the Optical IN jack of the
N
receiver to the Optical Out jack of the TV.
When the receiver (home theater) is set to On, you can hear sound output from the
N
TV's Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1
channel sound to the Home theater receiver. When the source is a digital component
such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver.
If there is a power interruption to the TV when the
N
Speaker Select may be set to External Speaker when you turn the TV on again. (see page 24)
Troubleshooting for Anynet +
Symptom
Anynet + does not work.
I want to start Anynet + .
I want to exit Anynet + .
The message Connecting to
Anynet+ device...
appears on the screen.
The Anynet + device does not
play.
The connected device is not
displayed.
The TV programme cannot be
recorded.
The TV sound is not output
through the receiver.
All manuals and user guides at all-guides.com
Receiver is set to On (by disconnecting the power cord or a power failure), the
Solution
Anynet + device. The Anynet + system supports Anynet + devices only.
• Check if the device is an
• Connect only one receiver (home theater).
Anynet + device power cord is properly connected.
• Check if the
Anynet + device's Video/Audio/HDMI 1.3 cable connections.
• Check the
Anynet + (HDMI-CEC) is set to On in the Anynet + setup menu.
• Check whether
• Check whether the TV remote control is in TV mode.
• Check whether it is Anynet + exclusive remote control.
+ doesn't work in certain situations. (Searching channels, Plug & Play, etc.)
• Anynet
• When connecting or removing the HDMI 1.3 cable, please make sure to search devices again
or turn your TV off and on again.
+ Function of Anynet + device is set on.
• Check if the Anynet
+ device is properly connected to the TV and check if the Anynet +
• Check if the Anynet
(HDMI-CEC) is set to On in the Anynet + Setup menu.
• Press the TV button on the TV remote control to switch to TV. Then press the TOOLS button
to show the Anynet + menu and select a menu you want.
+ menu.
• Select View TV in the Anynet
SOURCE button on the TV remote control and select a device other than Anynet +
• Press the
devices.
• (Note that the channel button operates only when a tuner-embedded Anynet
connected.)
• You cannot use the remote control when you are configuring Anynet
mode.
• Use the remote control when the Anynet
• You cannot use the play function when
• Check whether or not the device supports Anynet
• Check whether or not the HDMI 1.3 cable is properly connected.
Anynet + (HDMI-CEC) is set to On in the Anynet + setup menu.
• Check whether
+ devices again.
• Search Anynet
+ device using the HDMI 1.3 cable only. Some HDMI cables may
• You can connect an Anynet
not support Anynet + functions.
• If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power
cord or a power failure, please repeat the device scan.
• Check whether the antenna jack on the recording device is properly connected.
• Connect the optical cable between TV and the receiver.
English - 32
View TV
Device List
Record :
DVDR MENU
DVDR INFO
Receiver ◄
Setup
Move
U
+ or switching to a view
+ setting or switching to view mode is complete.
Plug & Play is in progress.
+ functions.
DVDR
On ►
Adjust Return
L R
+ device is not