FAR FMO20R Manuel D'utilisation page 29

ENGLISH
CLEANING AND CARE
• Turn off the oven and unplug the power cord
from the wall when cleaning.
• Keep the inside of the oven clean. When food
splatters or spilled liquids adhere to oven walls,
wipe with a damp cloth. Mild detergents may
be used if the oven gets very dirty. Avoid using
spray or other harsh cleaners. They may stain,
streak or dull the door surface.
• The outside of the oven should be cleaned
with a damp cloth. To prevent damage to the
operating parts inside the oven, water should
not be allowed to seep into the ventilation
openings.
• Wipe the door and window on both sides, the
door seals and adjacent parts frequently with
a damp cloth to remove any spills or spatters.
Do not use abrasive cleaner.
• A steam cleaner is not be used.
• Do not allow the control panel to become wet.
Clean with a soft, damp cloth. When cleaning
the control panel, leave oven door open to
prevent oven from accidentally turning on.
• If steam accumulates inside or around the
outside of the oven door, wipe with a soft
GB-24
cloth. This may occur when the microwave
oven is operated under high humidity
condition. And it is normal.
• It is occasionally necessary to remove the glass
tray for cleaning. Wash the tray in warm sudsy
water or in a dishwasher.
• The roller ring and oven floor should be
cleaned regularly to avoid excessive noise.
Simply wipe the bottom surface of the
oven with mild detergent. The roller ring
may be washed in mild, soapy water or in a
dishwasher. When removing the roller ring, be
sure to replace it in the proper position.
• Remove odors from your oven by combining
a cup of water with the juice and skin of one
lemon in a microwaveable bowl. Microwave
for 5 minutes. Wipe thoroughly and dry with a
soft cloth.
• If the light bulb burns out, please contact
customer service to have it replaced.
• The oven should be cleaned regularly and any
food deposits should be removed. Failure to
maintain the oven in a clean condition could
lead to deterioration of surface that could
adversely affect the life of the unit and could
possibly result in a hazardous situation.
ENGLISH
GB-25