Publicité
Les langues disponibles
Les langues disponibles
•
It is invalid in power-off or child lock state.
•
You can switch the temperature display from °F to °C by
pressing the Heater button for approximately 6 seconds. The
default system temperature setting is °F.
•
No action after 20s, the digital display is blank.
• Timer ( Figure 3.D)
•
Press to activate timer setting, default is 0.5H, digital area
shows 30.
•
Press UP (Figure 3.E) or DOWN (Figure 3.F) to choose the
timing, the options are 0.5H/1H/ 2H/3H/4H/ 5H/6H/7H/8H/OFF.
•
Once the timer is on and desired setting is reached, the system
will shut down after the chosen time.
•
Child Lock: Press and hold the Timer button for approximately 6
seconds to activate the Child Lock function, the display screen
will show "--". When the Child Lock is on, all the other features
are not work, long press the Turn down button for 6 seconds to
turn off the Child Lock function.
• UP (Figure 3.E) / DOWN (Figure 3.F)
•
Used in Flame, Heating, Timer controls.
•
If not assisting in Heating, Timer controls, used to adjust the
flame brightness.
• Display Screen (Figure 3.G):
•
The display screen will display the relative flames and heating
temperatures and the timer and the child lock information.
3b. Remote Control
The remote control can be used up to 13 ft (4 m) away from the
heater, so long as there are no obstructions between the remote
control and the heater. The remote can control all the settings as the
control panel does.
10
REMOTE CONTROL BATTERIES
Press and slide the battery cover on the rear of the remote and
remove the cover. Insert 2 new AAA 1.5V batteries into the battery
compartment. Ensure that the polarity is correct. Batteries are not
included in the package due to safety during transportation.
Note: Do not mix old and new batteries together in the remote.
Do not mix alkaline, standard (carbon-zinc) or rechargeable
(Nickel-cadmium, Nickel-metal, Hydride, etc.) batteries together.
11
Publicité
